Sign in
Follow

How to set a static IP Address for the on-premise sensor

 

Step 1: Go to “Sensors | Sensors” and choose your sensor

and copy the “Local DNS” and choose Get a one time passcode (you will need it below)

 

Step 2: Use the “Local DNS” to connect via HTTPS and Port 8443.   You can also use the sensors IP address.

p6.png

Login to the sensor <<get from NetWatcher support

p1.png

 

p7.png

Press “a” for Administration

 

Step 3: Enter the one time passcode from Step 1

p8.png

Step 4: A detailed menu will appear (choose 4 - Edit Interface)

p3.png

Add the IP address / CIDR (subnet -- If unsure of CIDR/subnet conversion review this table), Gateway IP address and DNS IP address.

p5.png

You may also want to edit the MIRROR Interface settings and set it to a 'blank' IP (so the Mirror never gets an IP address from DHCP).

 

Comments

Powered by Zendesk